ARIMBRA Automatic Water Level Controller | Reliable Home Pump Automation - GBDeal

ARIMBRA Automatic Water Level Controller — Reliable Home Pump Automation & Motor Protection

Brand: ARIMBRA | Seller: Global Business Deal (GBDeal)

Protect your motor, avoid dry-run damage, and keep perfect tank-level control — whether you need a basic semi-automatic controller or a multi-relay long-life starter type, ARIMBRA has a model to suit.

Post Summary

Title: ARIMBRA Automatic Water Level Controller — Reliable Home Pump Automation

Meta Description: ARIMBRA controllers offer dry-run protection, low & high voltage safety (160V–250V), buzzer alerts, and durable pulse sensing. Choose from 1-relay to 3-relay starter-type controllers and a range of sensors and cables.

Introduction — Why Choose ARIMBRA for Your Home Pump?

Water is essential and so is the equipment that brings it to your tap. A motor pump that runs without water (dry-run), or powers on during dangerously low or high voltage, is at risk of serious damage. The ARIMBRA Automatic Water Level Controller family was designed to prevent these problems with intelligent, reliable, and cost-effective electronics. Whether you’re automating a domestic borewell, an overhead tank, or a small commercial installation, ARIMBRA gives you built-in safety features:

Prevents motor from running dry (no water) — extends motor life.
Protects against low (<160V) and high (>250V) voltage switching that can damage motors.
Clear tank level indication and a buzzer alert when the motor starts.
Pulse sensing technology that keeps sensors durable and long-lasting.

Below we break down the product family, features, technical benefits, installation notes, product variants, and frequently asked questions to help you choose and install the right ARIMBRA controller for your needs.

Key Product Features (At a Glance)

Full Automation

Automatically starts and stops your pump based on tank water levels — no manual operation required.

Dry Run Prevention

Prevents the motor from running when there is no water, protecting mechanical seals and the motor winding.

Voltage Protection

Automatic protection prevents the motor from switching ON when voltage is below 160V or above 250V.

Buzzer Notification

A clear buzzer lets you know when the motor turns on, giving you an audible confirmation for peace of mind.

Pulse Sensing Technology

Advanced pulse sensing keeps sensors long-lasting and less prone to corrosion and false triggers.

Multiple Models

A wide variety of controller configurations (1-relay to 3-relay) and sensor/cable options make ARIMBRA flexible for many installations.

Product Range — Controllers & Sensors

ARIMBRA offers a selection of controllers tailored to different setups and budgets. Below is a practical listing of what’s available, with brief explanations to help choose the right model.

Controller Options

1 Relay 10-pin Long Life Full Automatic Controller — Robust, long-life relay used where long-term reliability is a must. Ideal for single-pump household setups with indicator features and full automation.
1 Relay 2-pin Semi-Automatic Controller — Basic semi-automatic model suitable for users who want some manual control while still preventing dry-run scenarios.
1 Relay 4-pin Blue Full Automatic Controller — Compact full automatic model with easy wiring and clear indicator LEDs.
1 Relay 6-pin Full Automatic Controller — Versatile model compatible with most domestic wiring standards and sensor arrays.
1 Relay 6-Pin Duplex Full Automatic Controller — Duplex option supports twin-tank or priority-tank switching and gives more flexibility for multi-tank systems.
3 Relay 6-pin Long Life Borwell Starter Type Full Automatic Controller — Starter-type model for setups requiring a soft-start or staged starting (useful when controlling higher load or multiple pumps).

Sensor & Cable Options

6-core 7/38 Copper Cable (tin laminated) — Used for multi-probe arrays where multiple level sensors are required.
4-core 7/38 Copper Cable (tin laminated) — Simpler runs for basic two- or three-probe systems.
Water Dry Run Sensor — Dedicated dry-run sensing probe that detects absence of water at pump suction or source.
Water Level Sensor — Probe used to detect water levels in overhead or underground tanks for auto on/off control.

How ARIMBRA Works — Technical Overview

ARIMBRA controllers use probe-based sensing together with pulse sensing electronics. Here's a simplified explanation:

Tank & Source Probing: Probes are placed at required levels in the overhead tank (for example, low and high) and optionally at the pump source to detect dry-run conditions.
Pulse Sensing: Instead of relying on simple continuous DC detection, pulse sensing emits short detection pulses and reads changes — this reduces electrochemical effects on metal probes and reduces false positives caused by conductivity variations.
Voltage Monitoring: The controller continuously monitors supply voltage and prevents motor engagement if voltage is below 160V or above 250V, preventing stress on the motor windings and starter circuits.
Relay Activation: When the controller detects that tank level is below the high limit and other conditions are satisfied (adequate voltage & no dry-run), the relay engages and the pump is powered. When the high level is reached or unsafe conditions are detected, the relay opens and the pump stops.
Buzzer & Indication: A buzzer sounds when the motor starts, and LED indicators show status for quick diagnostics.

This combination of features provides more reliable operation than simple float switches and helps protect your motor investment.

Benefits of Using ARIMBRA Controllers

Own a pump? Here’s what you stand to gain by installing an ARIMBRA controller:

Extended Motor Life: Dry-run prevention and controlled starts reduce mechanical and electrical stresses.
Energy Savings: Automatic operation avoids unnecessary runtime and reduces wasted electricity.
Safety: Voltage protection lowers the risk of damage caused by spikes or undervoltage.
Low Maintenance: Pulse sensing reduces corrosion-related failures so sensors last longer with less upkeep.
Reduced Downtime: Clear indicators and buzzer alerts make it easy to diagnose and respond to issues quickly.

Installation Guidance & Best Practices

While ARIMBRA controllers are designed for easy installation, following best practices ensures safe, effective operation:

Pre-installation Checklist

Confirm your supply voltage and verify pump rating (HP & amp draw).
Choose the appropriate controller model based on pump type and number of sensors required.
Use recommended cable types (tin laminated copper) for reliable signal transmission.
Locate control unit in a dry, ventilated place away from direct sunlight and heavy moisture.
Switch off power at source before wiring. Follow all local electrical codes and consult a licensed electrician if unsure.

Wiring & Sensor Placement

Typical wiring steps (general guidance — follow the included wiring diagram):

Mount the controller on a vertical surface near pump or electric panel while keeping it away from splashes.
Run the probe cables from tank to the controller. Use separate conduits if possible to avoid electrical interference from heavy power cables.
Place the low-level probe at the minimum tank level you want to allow before pump-on (for example, 25% tank depth), and place the high-level probe where you want the pump to stop.
If using dry-run sensor, place it at pump suction or in the source well where the absence of water would indicate a dry-run condition.
Connect the pump's power wires through the controller relay output. Ensure earthing/grounding is proper and secure.

Testing After Installation

Turn on supply and verify LED status and buzzer behavior.
Simulate low tank levels and confirm pump starts when low probe indicates empty and stops at the high probe.
Test voltage protection by temporarily simulating low voltage conditions (if safe to do so) or checking with a qualified electrician.

Detailed Specifications (Typical)

Operating Voltage Range: 160V — 250V (protection prevents switching outside this window)

Relay Types: 1-Relay (various pinouts), 3-Relay Borwell starter type for multi-stage control

Sensor Interface: Probe-based pulse sensing (4-core/6-core cable compatible)

Buzzer: On motor start (audible indicator)

Protection: Dry-run protection, voltage lockout, motor indicator

Environmental: Indoor-rated enclosure; avoid direct water ingress and intense heat

Common Use Cases

ARIMBRA controllers are ideal for:

Domestic homes with overhead storage tanks and borewell or municipal supply.
Small farms and gardens where reliable irrigation scheduling and pump protection is required.
Small commercial premises (shops, hostels) that depend on consistent water supply.
Retrofit projects to upgrade float-switch systems to more reliable probe- and electronics-based control.

Troubleshooting & Maintenance

Basic troubleshooting tips to keep your system healthy:

Pump not starting: Check main supply, fuse, relay health, and that low-level probe is signaling correctly.
Pump starts but no water: Dry-run sensor should prevent this — verify sensor placement and cable continuity.
False triggers: Ensure probe cables are not damaged and are routed away from heavy power cables; confirm grounding.
Buzzer not sounding: Check buzzer connection or the status of the unit — buzzer only sounds on motor start as an alert.
Sensor corrosion: Pulse sensing reduces corrosion risk; still, inspect periodically for heavy mineral deposits and clean if needed.

If a problem persists, contact the vendor or a licensed electrician for a hands-on diagnosis.

Frequently Asked Questions (FAQ)

Q: Will the controller protect my pump from brownouts and voltage spikes?

A: The ARIMBRA unit prevents the motor from switching on if the supply voltage is lower than 160V or higher than 250V. This reduces the risk of starting the motor under unsafe voltage conditions. For transient spikes, use of an external surge protector or voltage stabilizer is recommended in areas with frequent spikes.

Q: Can I use ARIMBRA with both borewell and municipal water systems?

A: Yes. The controller works with probe-based sensing which can be adapted to municipal supply + overhead tank arrangements and borewell supply; use the dry-run sensor on the borewell pump suction to prevent running without water.

Q: Do probes corrode over time?

A: All metal probes will experience some wear over very long periods. ARIMBRA’s pulse sensing greatly reduces electrochemical corrosion and false readings, increasing sensor life versus simple DC sensing systems.

Q: Can I replace my existing float switches with ARIMBRA?

A: Yes — most float-switch systems can be retrofitted by replacing floats with probes wired to the ARIMBRA controller. Consult the wiring schematic included with your controller for precise wiring instructions.

Customer Use Tips

Label cables at both ends for easier maintenance and future troubleshooting.
Keep a small maintenance log (installation date, service dates) to track sensor life and controller health.
Install a separate voltage stabilizer or surge protector if your area experiences frequent electrical instability.

Order & Trade Enquiries

Interested in ARIMBRA Automatic Water Level Controllers or bulk trade enquiries? Contact Global Business Deal (GBDeal):

Trade Enquiries: Global Business Deal — +91-86064 35123

Contact Form / Orders: Contact GBDeal

You can request bespoke packages, multi-unit pricing, and technical support for installation.

Smart Pump Automation & Protection

Use these tags on your blog and social posts to improve discoverability.

Sample Short Product Description (for product listings)

ARIMBRA Automatic Water Level Controller — Fully automatic pump controller with dry-run protection, voltage lockout (160V–250V), buzzer alert, and durable pulse-sensing probes. Available in 1-relay (2-pin/4-pin/6-pin/10-pin) and 3-relay starter types. Sensors and tin-laminated copper cables available.

Long-Form Narrative / Story (Good for blog engagement)

Imagine waking up to find your rooftop tank full and your household operating smoothly — washing machine humming, taps flowing, and no worries about your pump motor. Now imagine the reverse: a cracked seal, a motor burnt because it ran dry, or a pump prematurely failing from unstable power. The difference between those two mornings is often a small control unit. ARIMBRA’s water level controllers are designed to be that difference — a modest investment that pays back through fewer repairs, less downtime and a reassurance that your water system will behave the way you expect.

From families who need a dependable water supply to small businesses that can’t afford interruptions, a reliable controller is the unsung hero. With approachable wiring, simple indicators, and robust protection rules built into the device, ARIMBRA bridges the gap between household convenience and industrial reliability in an easy-to-install package.

ARIMBRA Automatic Water Level Controller | Smart Pump Automation & Protection - GBDeal